50A 12V Battery Quick Connect Kit with Anderson-Style Plug
The Sentorise 50A Battery Quick Connect Kit includes a pair of Anderson-style connectors for adding a reliable quick-disconnect point to 12V battery systems.

-
-
Make your 12V connection easier to service
An Anderson-style quick connector for compatible DC wiring. The two-piece housing provides a separable connection for equipment that needs to be disconnected for service or storage.
-
50A continuous rating
The connector rating is one part of the circuit. Cables, contacts and fuse protection must also suit the load.
-
6–12 AWG cable range
Match the cable to the supplied contact and use a suitable crimping tool.
-
Secure contact assembly
Silver-plated copper contacts sit inside the polycarbonate housing. Check polarity and contact retention before use.
Connect with the power switched off
Isolate the supply before assembling or disconnecting the wiring. Provide suitable circuit protection and confirm that both connector halves and contacts are compatible.
The Sentorise 50A Battery Quick Connect Kit includes a pair of Anderson-style connectors for adding a reliable quick-disconnect point to 12V battery systems. Designed for RV, marine, solar, and portable power applications where tool-free battery access is needed.
Specifications
- Rated current: 50A continuous
- Connector style: Anderson-style (genderless, tool-free disconnect)
- Contacts: Silver-plated copper
- Housing material: Flame-retardant polycarbonate
- Compatible wire gauge: 6–12 AWG
- Application voltage: 12V DC systems
What's Included
- 2 x Anderson-style connector housings
- 2 x Silver-plated copper contacts
Features
- Tool-free connect and disconnect — push to connect, pull to release
- Silver-plated contacts for low contact resistance and long service life
- Flame-retardant housing rated for high-heat and high-vibration environments
- Corrosion-resistant construction suitable for marine and outdoor use
- Anderson-style form factor compatible with standard 12V accessories and battery boxes
Suitable For
- Removable battery boxes and portable 12V power systems
- RV, marine, and off-grid solar installations requiring quick-disconnect access
- LiFePO4 and lead-acid battery systems up to 50A continuous load
Installation Requirements
- Wire gauge: 6–12 AWG (match to load and run length)
- Fusing: Required — size fuse to the load, not the connector rating
- Crimping: Use a proper crimping tool; do not solder contacts
- Not suitable for loads exceeding 50A continuous or unfused battery-direct wiring
- Product
- 50A 12V Battery Quick Connect Kit with Anderson-Style Plug
Check the selected listing and supplied documentation for included components, terminal details, current limits, mounting orientation and operating conditions. Pack quantity does not change the specifications of an individual unit.
Request the manual or a specification confirmation for this model
Delivery options and applicable charges are calculated for your destination and selected items at checkout.
Read the shipping policy · Read the return and refund policy · Track an existing shipment
For a return or a product issue, contact support with your order number and model before sending goods back. Contact support
Warranty scope and conditions depend on the product and the applicable terms. Please read the Warranty Policy and keep your proof of purchase.
Warranty Policy · Submit product registration details · Ask about this product
Frequently asked questions
What is this quick-connect kit intended for?
It provides an Anderson-style quick-disconnect point for compatible 12V DC battery and accessory wiring, including removable battery boxes. Match the connector arrangement, polarity, cable and load before installation.
Does the 50A rating apply to every wiring arrangement?
No. The listed connector rating is 50A continuous, but the complete circuit is also limited by the cable, contacts, installation and load. Do not use the connector for a load above its stated rating.
What cable size is listed for the contacts?
The listing specifies 6–12 AWG. Select the cable for the load and cable length as well as the contact fit; use the appropriate crimping tool and the product’s installation guidance.
Do I still need a fuse?
Yes. Provide suitable circuit protection and size the fuse for the cable and load. A quick connector does not replace fusing and is not intended for unfused battery-direct wiring.
Will it fit every connector sold as Anderson-style?
Do not assume interchangeability from the description alone. Check housing, contact and cable compatibility with the mating connector before purchase.
Where can I find the right manual or get help with compatibility?
Use this product’s specifications and documents section. If you need confirmation, contact support with the product model, your planned equipment and, for an existing unit, the serial number. Do not use another model’s instructions as a substitute.
Still have a question about this model?
Need help choosing?
Find the right battery, charger or accessory for your setup.